Digital outputs for solenoid valves, 4 & 8 channels

All distribution sites

Search for subsidiaries and agencies
x
Search
Previous
SGP - en
logo
ALL DISTRIBUTION
  • Search

Search

Webcode overview

Digital output modules

Efficient modules for digital output signals in hazardous locations
R. STAHL's digital output modules (DOM) are suitable for connecting up to eight intrinsically safe solenoid valves or pilot lights. The outputs are designed for operating various different solenoid valves and in certain configurations are also suitable for SIL 2 output shut down. Relay outputs for non-I.S. signals or integrated pilot solenoid valves also feature in the range.

Digital output modules (DOM) can be used to operate four or eight intrinsically safe solenoids, hydraulic valves and indicator elements. The Ex ia/ib intrinsically safe output characteristics are optimally configured for a wide range of solenoid valves. An I.S. control input for the Plant-Stop switch (IEC 61508 up to SIL 2) is also available for the Zone 1 and Class I Div.1 versions.

The I.S. outputs are short-circuit proof and galvanically isolated from the system.
A blue LED and diagnostic messages provide early warnings that maintenance is required in order to avoid system downtime.
The Zone 1 and Class I Div.1 versions have additional LEDs for each channel to indicate any line faults and the switching state.

In addition, there are versions with relay outputs for non-I.S. solenoid valves and with eight integrated pilot solenoid valves for direct pneumatic connection.

  • Efficient: Four or eight channels for virtually all solenoid valves (I.S., explosionproof), or alternatively with integrated pneumatics
  • outputs intrinsically safe, Ex eb/non incendive or pneumatics for installation in Zone 1, 2 and Class I Div.1, 2 – separate control input for SIL 2 plant-stop
  • Hot-swappable: Can be replaced while the system is in operation in explosive atmosphere

Filter product lines

Select the product lines that are applicable to your intended use.

Filter product lines

hide
Certificates
Zone Filter
Installation
Class1 Division and Zone
Version
Version2
Ex interface zone
Number of channels
Max. power consumption
Nominal voltage
Ex i output rated operation
Max. switching voltage

8 Series (13 Products)

Ex Digital output module relay Ex nA outputs for Zone 2/Div. 2 Series 9477/15 R. STAHL

Digital output module relay Ex nA outputs for Zone 2/Div. 2 Series 9477/15

  • With 8 de-energised relay contacts
  • Ex ec outputs with a high switching capacity up to 100 VA
  • Module in Zone 2 can be replaced without having to disconnect the power supply (i.e. hot-swapped)
Ex Digital output module, 4-channel version for Zone 1 Series 9475/32-04-72 R. STAHL

Digital output module, 4-channel version for Zone 1 Series 9475/32-04-72

  • 4 channels for Ex i hydraulic and solenoid valves up to 95 mA
  • Ex ib outputs with line fault monitoring, an LED fault and status display for each channel and SIL2 shutdown input
  • Modules in Zone 1 can be replaced without having to disconnect the power supply (i.e. hot-swapped)
Ex Digital output module, 4-channel version for Zone 1 Series 9475/32-04-x2 R. STAHL

Digital output module, 4-channel version for Zone 1 Series 9475/32-04-x2

  • 4 channels for Ex i solenoid valves up to 40 mA
  • Ex nA outputs with line fault monitoring, an LED fault and status display for each channel and SIL2 shutdown input
  • Modules in Zone 1 can be replaced without having to disconnect the power supply (i.e. hot-swapped)
Ex Digital output module, 8-channel version for Zone 1 Series 9475/32-08 R. STAHL

Digital output module, 8-channel version for Zone 1 Series 9475/32-08

  • 8 channels for Ex i solenoid valves up to 30 mA
  • Ex nA outputs with line fault monitoring, an LED fault and status display for each channel and SIL2 shutdown input
  • Modules in Zone 1 can be replaced without having to disconnect the power supply (i.e. hot-swapped)
Ex Digital output module, 8-channel version for Zone 2 Series 9475/33-08-xx R. STAHL

Digital output module, 8-channel version for Zone 2 Series 9475/33-08-xx

  • 8 channels for Ex i solenoid valves up to 30 mA
  • Ex ia outputs with line fault monitoring
  • Modules in Zone 2 can be replaced without having to disconnect the power supply (i.e. hot-swapped)
Ex Digital output module relay for Zone 1/Div. 1 Series 9477/12 R. STAHL

Digital output module relay for Zone 1/Div. 1 Series 9477/12

  • With up to 8 de-energised relay contacts
  • Ex e outputs with a high switching capacity up to 100 VA
  • Module in Zone 1 can be replaced without having to disconnect the power supply (i.e. hot-swapped)
Ex Socket for digital output module relay Series 9490 R. STAHL

Socket for digital output module relay Series 9490

  • Zone 1, connection by means of Ex e terminals
  • For 9477/12 digital output module relay
Ex Digital output module valve for Zone 1 Series 9478 R. STAHL

Digital output module valve for Zone 1 Series 9478

  • 8 channels for pneumatic valves
  • Pneumatic outputs with integrated 3/2-way valves and SIL2 shutdown input
  • Module in Zone 1 can be replaced without having to disconnect the power supply (i.e. hot-swapped)

Ask our Experts

Please get in touch with our contact person

Ex contact customer service center R. STAHL

SERVICE CENTER

Southeast Asia & Japan
+65 627 195 95
Callback
Previous

We'll be glad to call you back to support you!

We'll be glad to call you back to support you!
*Mandatory fields
Previous
Previous

Contact form

*Mandatory fields
Previous

We'll be glad to call you back to support you.

Wir rufen Sie gerne für ein Beratungsgespräch zurück. EN
*Mandatory